25' - 2" No Freeze Pump and Suction Hose

Thermostatically controlled with Aluminum Cam-Lock fittings and tested to minus 42 degrees F. Also available in 50' length.
Write a Review
- Simply unroll the hose to use just as you would a normal garden hose.
- Screw the female end (near the electrical cord) of the hose onto your faucet. Make sure the washer is in place inside the female coupling.
- Plug the 3-prong cord into a Ground Fault Circuit Interrupter (GFCI) or a properly-grounded 3-hole outlet that is protected by a GFCI.
- The heater is thermostatically controlled and will not turn on unless the ambient temperature approaches freezing temperatures.
- It is good practice to drain and unplug the hose when not in use to extend the lifetime of the hose.
- If water is frozen inside the hose, allow several minutes for the ice to melt after plugging in the hose and before use.
- DO NOT pull or tug the hose with excessive force as this may damage the fittings and electronic components.
- Download User Instructions En, FR, SP (PDF format)